Seating Depth Checkers Davidson

Product Description

The Davidson Seating Depth Checkers attach to the blade of your calipers with a small thumb screw and consists of a nose piece for the bullet and a base piece for the case head (sold separately). These two pieces together serve to align the cartridge for accurate measurements. The nose pieces can also be used without the base pieces in a similar manner to the other comparators. The nose pieces are machined with a taper for more accurate measurements.

BASE PIECES SOLD SEPARATELY.

Product Description

The NECO gauge utilizes v-blocks along with different mandrels and anvils to measure the variation occuring in your cases and loaded rounds. It uses a GEM dial indicator, which can be positioned almost anywhere on the case/loaded round. The NECO tool is able to measure the following: 1) Cartridge case -the curved ""banana"" shape of the cartridge 2) Cartridge case -the relative variations of wall thickness 3) Cartridge case -case head out of square with body 4) Individual bullet -out of round 5) Loaded round -seated bullet runout The NECO gauge is very well made and comes complete with the dial indicator, the necessary chords and anvils for holding different size cases, and most importantly a 21-page instruction booklet. The indicator included with the gauge is a high quality .001"" GEM dial indicator and actually represents a good portion of the cost of the tool. A separate gauge for 50 BMG reloaders is available by special order.

Product Description

The Redding 30-06 Springfield Instant Indicator is a precision made tool that allows a hand loader to quickly compare headspace and bullet seating depth within .001". The Instant Indicator leprovides an extremely quick method for comparing bullets, seating depths, fired cases, sized cases, trim lengths and loaded ammunition for uniformity. Easily perform any of the following tasks:

• Sort bullets for uniformity
• Sort cases fired in two or more rifles
• Sort sized cases for uniformity
• Set up sizing die correctly
• Compare sized cases to fired cases to determine the amount of headspace
• Check uniformity of shoulder bump
• Check bullet seating depth uniformity
• Sort loaded ammunition for uniformity
• Determine when cases need trimming
• Check trim length uniformity

Supplied with one bore diameter bushing, surface contactor, shoulder contactor, headspace guage and complete instructions

Dial Indicator Included.