6 Inch Dial Calipers Mitutoyo

Product Description

Mitutoyo's 6"" stainless steel dial caliper is a quality made professional measuring tool. Easy to read white faced dial. New Ergonomic Design.

• New designed dial movement for ultra smooth sliding and high shock protection.
• Titanium Nitride (TiN) coating is applied to the sliding surface to increase wear resistance.
• Can measure OD, ID, depth, and steps.
• Lock screw for dial bezel and for holding the slding jaw position

• Accuracy .001 inch
• Supplied in fitted plastic case

Product Description

The Stoney Point Chamber-All Bullet Comparator body attaches to the blade of your caliper with a small thumb screw and utilizes inserts for each caliber. The design of this tool allows proper alignment when used with the Stoney Point Chamber-All OAL gauge (offset position), or it can be used in a conventional centerline method. Inserts are sold separately, or the tool can be purchaed with six inserts as a kit. The body can also be used with to hold the Stoney Point headspace gage inserts.

Product Description

The Sinclair Chamber Length Gauges are designed so the handloader can determine the true length of his rifle's chamber when measuring from the bolt face to the end of the chamber's neck. This measurement will tell you how much excess case length your chamber may have over published trim lengths in reloading handbooks.

The Sinclair Gauges are inserted into a fired, unprimed shortened case and then chambered into your rifle. The insert pushes back into the case when it contacts the end of your chamber. You then extract the case and measure the overall length. The gauge is made of 12L14 soft steel so it will not damage your chamber. Step-by-step instructions accompany each gauge. The gauges can be used over and over again.

The differences between published trim lengths and the actual length of your chamber can be quite significant. You could be over trimming your cases by .030 inch or more.

NOTE: The 22 caliber gauge will not work on thin-necked cases such as the 22 Hornet, 218 Bee, or cartridges based on these cases. The 30 caliber gauge will not work on teh 30-30 Winchester. None of the gauges listed will work on tight-necked chambers except for the G-243T. Should not be used in handguns, semi automatic rifles, lever actions rifles and pump action rifles.